ARLON DPF 8000 PDF
Arlon DPF White Ultra Tack Arlon’s DPF is a 90 micron, satin white, high-tensile, PVC film with aggressive, permanent adhesive. Designed to stick to . The ultimate premium film for hard to stick surfaces. A durable film combined with a high tack adhesive system allows you to use one film for all your difficult. “We use Arlon DPF every day because of its durability and price point. We wrap a lot of brick walls and needed something that would hold up in heavy.
|Published (Last):||24 March 2018|
|PDF File Size:||15.63 Mb|
|ePub File Size:||6.78 Mb|
|Price:||Free* [*Free Regsitration Required]|
Standard warranty applies to vertical applications only. With one person working the heating unit in front of the second aflon who is peeling film, the job proceeds at a uniform and consistent pace.
We do not recommend wrapping gasoline tanks or similar plastics exposed to like fumes.
PP, PEplastics exposed to gasoline from tanks will migrate through plastic and interfere with vinyl adhesion to the plastic. To assure highest adhesion the graphics will benefit from a final installation pass using a soft roller and heat source in combination.
These surfaces benefit from slightly roughening with sandpaper before installation or surface oxidation with flame.
DPF 8000™ Ultra Tack
Where it is practical, two people on the removal make the job go far faster than using just one. Application in cold temperature environments. When printing this product be vigilant about drying the finished decal completely before df, top coating or installing. Concrete, Masonry, and Tile The surface should be entirely dust free: For this reason, an edge seal is recommended for applications that have very rough surfaces.
Arlon DPF Mil 5yr | FELLERS
Rough surfaces may not carry the standard warranties. Plastic Alron surfaces benefit from slightly roughening with sandpaper before installation or surface oxidation with flame. This is contingent upon no rain or harsh outdoor weather conditions. The surface should be entirely dust free: Click here to see the WrapItRight video: Because of the porous nature of all masonry and its general roughness, Arlon does expect water, snow or ice to seep between the film and wall and collect on the xpf edges of the applied graphic.
If the surface is not sealed there must be no loose paint, grit or dpd present. Removal steps are much easier as the adhesive will remove more cleanly and if any adhesive remains, the surface will be cleaned of residue more easily. Where only one person is working there will be constant starting and stopping in addition to the problems of the heat being very inconsistent.
Due to the porosity of certain types of plastics i. As a result, it is best practice to not leave the printer unattended when printing to avoid headstrikes due to adhesive build up on the film edges over time. The surface must be sealed with a complete coat of paint or concrete sealer and 800 to dry.
Printed durability is dependent on the 800 system used.
DPF ™ Ultra Tack Technical Details | Arlon Graphics
Moisture cannot wick to the arkon surface from within the matrix of the wall. For many polyolefinic surfaces, once the oily skin of the plastic is modified bond will improve dramatically. Addition of heat during removal will make the process much cleaner and faster.
Special Considerations Because of the porous nature of all masonry and its general roughness, Arlon does expect water, snow or ice to seep between the film and wall and collect on the upper edges of the applied graphic. Graphics Removal Remove the film in a continuous smooth motion at a shallow angle for the fastest separation.
The film installs best on flat surfaces when processed and applied according to Arlon recommendations. The trade-off for high tack and adhesion is to expect higher visible shrinkage than normal.
Sealing porous surfaces creates three benefits: Dust due to ablation cannot xrlon under the vinyl. Remove the film in a continuous smooth motion at a 80000 angle for the fastest separation. The film should be heated to a point of softening. Non-vertical applications are not warranted for this product.